Description
Liftmaster 635LM Genuine Security+ Plug In Plug In External Receiver 635LM-01
This is the actual 635LM, used for 390MHz remotes that were compatible with red/orange learn button operators.
DOES NOT INCLUDE THE SQUARE COVER PLATE, HOWEVER, THIS HAS NO FUNCTION OTHER THAN RUNNING THE DOOR DIRECTLY FROM THE UNIT WHICH IS NOT NECESSARY.
CAUTION: often people are selling the 315MHz version of this on eBay which is the "365LM" that only works with remotes compatible with the purple learn button operators.
Remotes that work with this unit include...
- 971LM
- 972LM
- 973LM
- 977LM Keypad
- 139.53684 Keypad
- 940CB Keypad
- And many others....
This unit is used to replace the internal receiver unit on your garage door circuit board and is really simple to setup....
1. Plug into a standard outlet
2. Attach to your operator circuit board where the wall button attaches
3. Program your remotes to the plug-in unit
4. Use remotes like normal!
There's about 8-10 feet of wire provided with this unit but if it's not long enough because you're outlet is too far away, you can use any low voltage wire such as phone wire or CAT-5 wire.
NOTE: The part you receive WILL NOT be the exact one pictured, however it will be the same part number OR AN INTERCHANGE listed above, in similar condition. Items are used and may have paint, nicks, scratches, missing stickers, fading etc, but they are GUARANTEED to work or your MONEY BACK!
- 60 Day Free Returns!
- Ships Fast!
- Ships Free!
This is the actual 635LM, used for 390MHz remotes that were compatible with red/orange learn button operators.
DOES NOT INCLUDE THE SQUARE COVER PLATE, HOWEVER, THIS HAS NO FUNCTION OTHER THAN RUNNING THE DOOR DIRECTLY FROM THE UNIT WHICH IS NOT NECESSARY.
CAUTION: often people are selling the 315MHz version of this on eBay which is the "365LM" that only works with remotes compatible with the purple learn button operators.
Remotes that work with this unit include...
- 971LM
- 972LM
- 973LM
- 977LM Keypad
- 139.53684 Keypad
- 940CB Keypad
- And many others....
This unit is used to replace the internal receiver unit on your garage door circuit board and is really simple to setup....
1. Plug into a standard outlet
2. Attach to your operator circuit board where the wall button attaches
3. Program your remotes to the plug-in unit
4. Use remotes like normal!
There's about 8-10 feet of wire provided with this unit but if it's not long enough because you're outlet is too far away, you can use any low voltage wire such as phone wire or CAT-5 wire.
NOTE: The part you receive WILL NOT be the exact one pictured, however it will be the same part number OR AN INTERCHANGE listed above, in similar condition. Items are used and may have paint, nicks, scratches, missing stickers, fading etc, but they are GUARANTEED to work or your MONEY BACK!
- 60 Day Free Returns!
- Ships Fast!
- Ships Free!
